1.非电气专业职员不得随意拆装重庆升降货梯电器，以防触电或误接。Non electric professional staff shall be free to disassemble the Chongqing elevator goods ladder electrical appliances, in order to prevent electric shock or mistake.
2.需要进入重庆升降货梯工作平台下面检验时，必需吊住升降平台工作平台。以防升降平台台溘然下降，造成职员伤亡。Need to enter the Chongqing elevator landing platform below the working platform, the lifting platform must be suspended platform. In order to prevent the lifting platform passed down, causing casualties.
3.非专业职员不得任意调整溢流阀，液压系统中的每个元件都是在划定压力下工作时，任意调整溢流阀后，可能会造成液压系统非正常运转。对人、机、物都会有不必要的损伤。Non professional staff shall not be arbitrarily adjusted relief valve, hydraulic system of each component is under the designated pressure work, any adjustment relief valve, the hydraulic system may be caused by abnormal operation. There will be no need for people, machines, and things.
4.卸液压系统任何部位之前，必需首先卸压，以免压力油喷出，工作台溘然下滑。Before any part of unloading hydraulic system, must first pressure relief, in order to avoid pressure oil spray, bench passed down.
5.相应运动部件间均加注一些润滑油，延长轴承使用寿命。The corresponding moving parts are filled with lubricating oil, prolong the service life of the bearing.
6.检查重庆升降货梯液压油的油质和油位。升降台全程升起。在这位置时，液压油面应高出箱底40-50毫米。重庆升降平台液压机是否变暗、发粘或有砂砾等异物，如有发现应及时更换120#液压油。Chongqing check cargo lifter hydraulic oil oil and oil. Lift table full rise. In this position, the hydraulic oil level should be higher than the 40-50 mm. Chongqing lifting platform hydraulic press is dark, sticky or gravel and other foreign bodies, such as the discovery should be replaced in a timely manner 120# hydraulic oil.
全国服务热线
