怎么提高升降平台的运行效率？

重庆升降平台液压油流经各类液压阀时不可避免的存在着压力损失和流量损失，这一部分的能量损失在全部能量损失中占有较大的比重。在此，给您如何提高重庆升降平台的运行效率。There is an inevitable pressure loss and flow loss when the hydraulic oil flows through all kinds of hydraulic valves in Chongqing. This part of the energy loss accounts for a large proportion of total energy loss. Here, how to improve the operational efficiency of Chongqing lift platform.

1.合理选择液压器。重庆升降平台调整压力阀的压力也是降低功率损失的一个重要方面。流量阀按系统中流量调节范围选取并保证其最小稳定流量能满足使用要求，压力阀的压力在满足液压设备正常工作的情况下，尽量取较低的压力。Reasonable choice of hydraulic device. Chongqing lift platform to adjust the pressure of the pressure valve is also an important aspect of reducing power losses. Flow valve according to the system to adjust the range of flow and ensure that the minimum stable flow can meet the requirements of the use of the pressure valve to meet the normal work of the hydraulic equipment, as far as possible to take a lower pressure.

2.合理选择液压油。重庆升降平台液压油在管路中流动时，将呈现出黏性，而黏性过高时，将产生较大的内摩擦力，造成油液发热，同时增加油液流动时的阻力。当黏性过低时，易造成泄漏，将降低系统容积效率，因此，一般选择黏度适宜且黏温特性比较好的油液。Reasonable choice of hydraulic oil. Chongqing lifting platform hydraulic oil flow in the pipeline, will present a viscosity, and high viscosity, will produce a large internal friction, resulting in oil and heat, while increasing the resistance of oil flow. When the viscosity is too low, it is easy to cause leakage, the system volume efficiency will be reduced, therefore, the general selection of appropriate viscosity and viscosity temperature characteristics of good oil.

3.另外，当重庆升降平台油液在管路中流动时，还存在着沿程压力损失和局部压力损失，因此设计管路时尽量缩短管道，同时减少弯管。In addition, when the Chongqing oil pipeline in the pipeline flow, but also the existence of the pressure loss along the way and local pressure loss, so as to shorten the design pipeline, while reducing the pipe.

4.保证重庆升降平台工作环境的电压稳定。电压不稳定会烧坏操作箱里面的各类电器元件，是升降设备无法收到控制，其次是频繁的电压不稳定会直接烧坏动力单元中的电机，电机烧毁导致的后果是非常严重的，会导致压力瞬间降低，如果升降货梯没有安装溢流阀或者防爆阀等安全设备，会导致设备下坠，导致事故的发生。To ensure the voltage stability of the working environment of Chongqing lifting platform. All kinds of electrical components, voltage instability will burn out the operation box, lifting equipment is unable to receive the control, followed by frequent voltage instability will burn out the motor directly in power unit, the motor burned consequence is very serious, will lead to reduce the pressure, if the lifting elevator is not installed or explosion-proof valve relief valve other safety equipment, can cause the device to fall, cause accidents.