升降平台有多少种支腿？

重庆升降平台的支腿一般是四只，并且都是高度单独可调的螺杆。这样是为了在不够平整的地面作业时，能够通过调节四条腿的高度，让四条腿都能接触地面。保证重庆升降平台 http://www.mgsjx168.com/的水平，防止在升高时出现倾斜甚至翻覆的情况。常用液压支腿有：蛙式支腿、H型支腿、X型支腿、辐射式支腿、摆动支腿等。Chongqing lifting platform legs are generally four, and are highly independent adjustable screw. This is in order to work on the ground is not enough, can adjust the height of the four legs, so that the four legs are able to touch the ground. Ensure Chongqing lifting platform level, prevent the rise in tilted or even overturned situation. The commonly used hydraulic legs: frog leg, leg type H and type X leg, radiation type leg and swing leg etc..

1.重庆升降平台X型支腿这种支腿工作时，支腿呈X型，重物活动的空间比H型支腿要大，因此常和H型支腿混合使用，形成前H、后X的型式。Chongqing lifting platform X leg support legs, the legs are X type, heavy activity space than H type leg to be large, so often and H type leg mixed use, form the former H, after the X type.

2.重庆液压升降平台摆动支腿这种支腿在起重作业时，支腿在液压缸的作用下能摆动到与车架纵向轴线相垂直的位置上；非工作状态时，支腿不能太长，所以横向支撑的间隔较小。Chongqing hydraulic lifting platform swinging outrigger legs in the lifting operation, the legs can swing to the vertical and longitudinal axis of the frame position under the effect of the hydraulic cylinder; the non working state, the legs can not be too long, so the smaller lateral support interval.

3.重庆导轨式升降平台蛙式支腿这种支腿的活动支腿铰接在固定支腿上，其展开动作由液压缸完成，特点是结构简单、重量较轻，但支腿跨度不大，只适用于小吨位的起重机。Chongqing rail type lifting platform the breaststroke leg leg leg is hinged on the fixed legs, the action of a hydraulic cylinder, is characterized by simple structure, light weight, but the leg span not only suitable for small tonnage cranes.

4.重庆升降平台H型支腿这种支腿在液压升降机中并不常用，有两个液压缸。活动支腿伸出后，工作时垂直腿撑地，形如H而得名。特点是支腿跨距较大，对场地适应性较好，目前已被广泛采用。Chongqing lifting platform H leg support is not commonly used in hydraulic elevator, there are two hydraulic cylinders. After the extension of the supporting leg, the vertical leg to support the work, such as the shape of the name H. Is leg span larger, better adapt to the site, has now been widely used.

5.重庆升降平台厂家认为，辐射式支腿以转台的回转中心为中心，从车架的盆形架向下呈辐射状向外伸出4个支腿。特点是稳定性好，在起重作业时主要应用在一些特大型的起重机上。Chongqing lifting platform manufacturers believe that the radiation of the legs to the rotary center of the turntable as the center, from the frame of the frame of the bottom of the radiation downward 4 legs. The utility model has the advantages of good stability, and is mainly used in some large cranes in hoisting operation.