重庆升降机不允许偏载，不允许超载，这是客户在购买机器的时候，我们厂家不断提醒的一个问题。偏载会给我们的设备或者高空作业人员带来那些危害呢？具有什么样的危险性呢？Chongqing lift does not allow partial load, not allowed to overload, which is the customer in the purchase of the machine, we continue to remind the manufacturers of a problem. Partial load will give our equipment or high-altitude workers who bring harm? What are the risks?
我们知道重庆升降机是由液压油缸顶起来的，如果一边载重较大，轻者会造成机器的单边磨损加大，严重的可能就会造成机器的侧翻。We know that Chongqing is composed of the hydraulic cylinder lifts up, if the side load is large, unilateral wear increase light will cause the machine, may cause the severe rollover machine.
特别是旧的机器，设备由于使用时间过长，自身的承重下降，如果再偏重的情况下，很容易直接侧翻，给机器和作业人员的安全带来一定的危险性。我们在使用重庆升降机的时候一定要遵守安全操作规程。Especially the old machine equipment, due to the use of time is too long, its bearing down, if the emphasis of the case, it is easy to direct rollover, bring some risk to the machine and the safety of the workers. We must comply with safety procedures when using the Chongqing lift.
也有些客户会问，如果我上一个人进行重庆升降机操作难道只能站在中间不能动吗？这个倒不是这样定义的，偏载的定义是在一边重量较为集中，而边一边则没有承重。如果单个人上去的话正常移动作业则不会造成什么危险。Some customers will ask, if I lift a person on the Chongqing lift operation can only stand in the middle can not move? This is not the case, the definition of load is in the side of the weight is more concentrated, while the side without bearing. If a single person to move the normal operation will not cause any danger.
全国服务热线
